Topless Tower crane QTZ125P 6015
Topless Tower crane QTZ125P 6015
|
QTZ125P(6015) flattop tower crane Technical Parameter |
|||
|
Jib length |
60 m |
||
|
Mast Section |
1.8*1.8*2.5 m |
||
|
Max.load |
8 t |
||
|
Max. rated torque |
1250 KN.m |
||
|
Tip load |
1.5 t |
||
|
Hoisting height |
Stationary |
50 m |
|
|
Achor |
150 m |
||
|
Hoisting speed |
a=2 |
a=4 |
|
|
80/40 m/min;40/20 m/min |
|||
|
Trolleying speed |
0-55 m/min |
||
|
Slewing speed |
0.7 r/min |
||
|
Climbing speed |
0.6 m/min |
||
|
Upper chord of lifting beam |
<100*8, 80*8 buckled square iron, Ø89*6 |
||
|
Motors |
Variable frequency motor |
||
|
Materials of mast |
Q345B |
||
|
Parallel width of lifting beam |
1357 mm |
||
Easy jib erection and dismantling.
Jib configuration can be easily modified as the works proceed, can be erected and or dismantled “ in the air”, section by section
Never before has there been a crane that is so easy and quick to erect in total safety
Hoisting and trolley ropes installed on the ground, plug-in connections for electrical equipment and safety devices, time-saving factory assembly of cab
Variable frequency slewing, continuously variable speed control by means of a stepless controller, that also adapts to the crane operator’s drving style.
Variable frequency hoisting, speed continuously adjusted and optimised according to the load being handled, very slow speeds, smooth speed changes, high productivity.
The masts adopt the standard bases, allowing it to be adjusted to the desired height.